Two choices router
The 2choices module is a passive utility offering the routing of 2×5 sources on two independent channels to 5 linked outputs.
Being bi-directional, it can also be used as 1×5 sources to 2×5 sources…
(For presentation, all leds are visible by photo editing because in reality leds A & B cannot be activated at the same time).
Option 1:
– 2×5 IN’s to 5 OUT’s linked
Switch in position A:
The 5 3.5mm jack connectors of channel A are routed to the connectors of the lower part of the module.
LED A lights to indicate the selected routing.
The channels are independently linked. Thus, A1 is connected to 1 of the lower part, A2 to 2 etc…
Switch in position B:
The 5 3.5mm jack connectors of channel B are routed to the connectors of the lower part of the module.
LED B lights to indicate the selected routing.
The channels are independently linked. Thus, B1 is connected to 1 of the lower part, B2 to 2 etc…
Option 2:
– 5 IN’s to 2×5 OUT’s linked
Switch in position A:
The 5 3.5mm jack connectors in the lower part of the module are routed to the channel A connectors.
LED A lights to indicate the selected routing.
The channels are independently linked. Thus, 1 is connected to A1 of the lower part, 2 to A2 etc…
Switch in position B:
The 5 3.5mm jack connectors in the lower part of the module are routed to the channel B connectors.
LED B lights to indicate the selected routing.
The channels are independently linked. Thus, 1 is connected to A1 of the lower part, 2 to A2 etc…
Accept all signals.
Available with black panel.
Price: 45€ (without shipping costs).
To order, please contact me by email. The terms of payment, delivery times and shipping costs will be detailed to you by return email. Payment will only be in euros (€) and can be made by paypal or by check for metropolitan France. International delivery with tracking number.
Learn more about delivery terms.
Specifications :
Size 6HP, epoxy panel 1,6 mm.
Deep : 25mm (skiff friendly).
PCB in epoxy FR4 dual layer, 1,6 mm. Surface finish HASL.
Components tested and assembled by hand, in Brittany, France.
Available as an assembled Module, no kit.
In the box : M3 & nylon nuts.
Consumption: ~ 4 mA (+12V) / 0 mA (-12V).
