The SIGNAL SWITCH module is a variation of the “SIGNAL SWITCH 2” module, it is a “MUTE” module composed of eight stages.
Using quality ‘vactrols’ helps avoid annoying clicks when turning your signals on/off through the module, and adds an interesting “fade out”. The MUTE of the signals is therefore clean and discreet.

Explanations:
An incoming “IN” and outgoing “OUT” signal can be muted by activating an illuminated push button.

ON = Button pressed, white LED lit, the incoming signal is directed to the output and therefore remains audible.
MUTE = Button off, incoming signal is muted. The use of “vactrol” avoids an unpleasant click and brings a slight fade OUT.

Internal routing (normalization) is a passive multiple of input 1:
The incoming signal on input 1 is also routed to the other 7 outputs 2-8 (which retain their own “MUTE” function). Inserting a jack into one of the inputs (2 to 8) breaks the downstream routing. This allows different combinations for its use, depending on your needs.

A jumper at the back allows the module to be split into two independent stages:
Thus, the signal entering input 1 is also routed to outputs 2-4 (which retain their own “MUTE” function). Inserting a jack into one of the inputs (2 to 4) breaks the downstream routing.
AND
The signal entering input 5 is also routed to outputs 6-8 (which retain their own “MUTE” function). Inserting a jack into one of the inputs (6 to 8) breaks the downstream routing.

Price: 90€ (without shipping costs).