Two-channel passive multiple (more commonly called “switched multiple”) with two-color LED indication of the selected channel: blue color = channel A, green = channel B (for this example of two-color LED). If off, the signal is muted.

At the rear of the module, jumpers allow the module to be divided into two independent parts (2×4). You can even go further, such as splitting channel A into two parts (2×4) and leaving channel B in one part (8 I/O). I let you imagine the many possibilities of this option 🙂

Accepts all signals (volt/octave: the module being passive for the routing part, it is preferable not to exceed x2 to maintain good tracking).

*Customization option (+2€): I can replace the switches of your choice (“latching” by default: on-off-on = 3 positions maintained) with “momentary” ones (when you release the lever, it resumes its position initial center). For example, 2 of the 8 switches can be “momentary” for momentary actions. It all depends on your intended use, please let me know.

Several models (color) to choose from: blue/green or blue/red or blue/yellow.

 Also available in 1U format (intellijel™ or pulplogic™)

Available with black or white panel.

Price: 62€ (without option* – excluding shipping costs)

To order, please contact me by email. The terms of payment, delivery times and shipping costs will be detailed to you by return email. Payment will only be in euros (€) and can be made by paypal or by check for metropolitan France. International delivery with tracking number.
Learn more about delivery terms.

Specifications :
Size 6HP, epoxy panel 1,6 mm.
Deep : 25mm (skiff friendly).
PCB in epoxy FR4 dual layer, 1,6 mm. Surface finish HASL.
Components tested and assembled by hand, in Brittany, France.
Available as an assembled Module, no kit.
In the box : M3 & nylon nuts.
Consumption: ~ 5 mA (+12V) / 0 mA (-12V).


MODULARGrid link