The SIGNAL SWITCH module is a “MUTE” module composed of two independent stages, depending on the position of a jumper located at the rear (2x mono or 1x stereo).Using quality ‘vactrols’ helps avoid annoying clicks when turning your signals on/off through the module, and adds an interesting fade out. The MUTE of the signals is therefore clean and discreet.
Explanations:An incoming “IN” and outgoing “OUT” signal can be muted by activating a selector.
ON = selector up, the incoming signal is directed to the output and therefore remains audible, a yellow LED lights up.MUTE = selector down, incoming signal is muted. The use of “vactrol” avoids an unpleasant click and brings a slight OUT fade (the LED goes out).
Internal routing (normalization) is a passive multiple of input 1:The incoming signal on input 1 is also routed to output 2 (which retains its own “MUTE” function). Inserting a jack into input 2 breaks the downstream routing. This allows different combinations for its use, depending on your needs.
Other option:A jumper at the back allows the module to be split, either:
Price: 40€ (without shipping costs).
To order, please contact me by email. The terms of payment, delivery times and shipping costs will be detailed to you by return email. Payment will only be in euros (€) and can be made by paypal or by check for metropolitan France. International delivery with tracking number.Learn more about delivery terms.
Specifications :Size 2HP, epoxy panel 1,6 mm.Deep : 25mm (skiff friendly).PCB in epoxy FR4 dual layer, 1,6 mm. Surface finish HASL.Components tested and assembled by hand, in Brittany, France.Available as an assembled Module, no kit.In the box : M3 & nylon nuts.Consumption: ~ 5 mA (+12V) / ~ 5 mA (-12V).
MANUAL soon
MODULARGrid link